Voir la source de Wifi

[[Category:Systèmes]]

https://forum.ubuntu-fr.org/viewtopic.php?id=2011439

chris@ordi:~$ dmesg | grep rtl
[    6.312684] rtl8192ee: Using firmware rtlwifi/rtl8192eefw.bin
[    6.318298] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    6.318468] rtlwifi: rtlwifi: wireless switch is on
[    6.352737] rtl8192ee 0000:23:00.0 wlp35s0: renamed from wlan0


chris@ordi:~$ nmcli dev wifi
*  SSID             MODE   CHAN  DÉBIT    SIGNAL  BARS  SÉCURITÉ    
   FreeWifi_secure  Infra  11    54 Mo/s  100     ▂▄▆█  WPA1 802.1X 
   freeboxsasa      Infra  11    54 Mo/s  100     ▂▄▆█  WPA1        
   FreeWifi         Infra  11    54 Mo/s  100     ▂▄▆█  --          
   SFR-d158_2GEXT   Infra  11    54 Mo/s  100     ▂▄▆█  WPA1 WPA2   
   SFR-d158         Infra  11    54 Mo/s  67      ▂▄▆_  WPA2 


sudo -i
echo "options rtl8192ee swenc=1"  >  /etc/modprobe.d/rtl8192ee.conf
exit

https://askubuntu.com/questions/526214/how-to-set-parameters-for-realtek-wifi-rtl8723

sudo systool -a -v -m rtl8723be | grep -A8 "Parameters:"

sudo nano /etc/modprobe.d/rtl8723be.conf

options rtl8723be debug=1
options rtl8723be disable_watchdog=N
options rtl8723be fwlps=Y
options rtl8723be ips=Y
options rtl8723be msi=N
options rtl8723be swenc=N
options rtl8723be swlps=N

https://askubuntu.com/questions/1028547/rtl8192ee-wifi-not-working


https://forum.siduction.org/index.php?topic=5555.0

# inxi -v5
# systemctl --failed --no-pager
# ifconfig

<hr>

 iwconfig <iface> essid livois
 iwconfig <iface> mode ad-hoc
 iwconfig <iface> channel 10 

 ifconfig <iface> 192.168.xxx.xxx

 iwlist <iface> scan
 iwlist <iface> channel

From the README.Debian script that comes with wireless-tools: /etc/network/interfaces
	
You can now add extra statements to the iface sections of the files in
/etc/network/interfaces that are specific for wireless interfaces. They
are of the form:

    wireless-<function> <value>

Before the interface is brought up, such a statement will result in the
execution of the following command:

    iwconfig <interface> <function> <value>

Example:

<licode>
iface eth0 inet static
    address 192.168.1.2
    network 192.168.1.0
    netmask 255.255.255.0
    broadcast 192.168.1.255
    wireless-essid livois
    wireless-mode ad-hoc | managed
</licode>

	The current Debian script support all arguments present in
wireless.opts apart from Nickname. You can check this in the script
/etc/network/if-pre-up.d/wireless-tool.
	You will need of course to install the Wireless Tools package
if it's not already done, which is part of the standard package list
(use dselect, dpkg, apt or anything you like to get it).





{{copy|2007-2018|Christophe de Livois|FDL}}