Wifi - Historique des versions

Christophe le 2 juin 2018 à 15:58

2018-06-02T15:58:25Z

@@ Ligne 1 : / Ligne 1 : @@
 [[Category:Systèmes]]
-http://acx100.sourceforge.net/matrix.html
+https://forum.ubuntu-fr.org/viewtopic.php?id=2011439
-http://www.linux-wlan.org/ (liste de matériel compatible)
+chris@ordi:~$ dmesg | grep rtl
-http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.usage.html
+chris@ordi:~$ nmcli dev wifi
-http://hostap.epitest.fi/wpa_supplicant/
   iwconfig <iface> essid livois

Christophe : /* le WPA */

2018-06-02T15:41:01Z

le WPA

← Version précédente		Version du 2 juin 2018 à 15:41
Ligne 54 :		Ligne 54 :


	~~=le WPA=~~
	~~http://hostap.epitest.fi/wpa_supplicant/~~

	~~http://wiki.debian.org/WPA~~

	~~#sudo apt-get install wpagui wpasupplicant~~

	~~<licode file=/etc/network/interfaces>~~
	~~auto wlan0~~
	~~iface wlan0 inet static~~
	~~address 192.168.10.33~~
	~~network 192.168.10.0~~
	~~netmask 255.255.255.0~~
	~~broadcast 192.168.10.255~~
	~~gateway 192.168.10.1~~
	~~wpa-ssid livois.com~~
	~~wpa-key-mgmt WPA-PSK~~
	~~#wpa-psk: your preshared wpa key. Use wpa_passphrase(8) to generate your psk!~~
	~~wpa-psk 927ff98714d0a8d74e131d942e1dfa49d268293953c68a6b85ece7eed8beb9b0~~
	~~wpa-proto WPA~~
	~~</licode>~~

	{{copy\|2007-2018\|Christophe de Livois\|FDL}}		{{copy\|2007-2018\|Christophe de Livois\|FDL}}

Christophe le 2 juin 2018 à 15:39

2018-06-02T15:39:57Z

@@ Ligne 1 : / Ligne 1 : @@
 [[Category:Systèmes]]
 http://acx100.sourceforge.net/matrix.html
@@ Ligne 54 : / Ligne 52 : @@
 (use dselect, dpkg, apt or anything you like to get it).
 =le WPA=
@@ Ligne 178 : / Ligne 76 : @@
 </licode>
-{{copy|2007|Christophe de Livois|FDL}}
+{{copy|2007-2018|Christophe de Livois|FDL}}

Christophe : 1 version

2012-05-28T20:32:00Z

1 version

← Version précédente	Version du 28 mai 2012 à 20:32
(Aucune différence)

Christophe : /* Connextant Prism ISL386 [Prism Javelin/Prism Xbow] */

2007-06-09T14:45:33Z

Connextant Prism ISL386 [Prism Javelin/Prism Xbow]

Nouvelle page

[[Category:Systèmes]]

http://ndiswrapper.sourceforge.net/

http://acx100.sourceforge.net/matrix.html

http://www.linux-wlan.org/ (liste de matériel compatible)

http://www.linuxhomenetworking.com/linux-hn/wmp11-linux.htm

http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.usage.html

http://hostap.epitest.fi/wpa_supplicant/

iwconfig <iface> essid livois
iwconfig <iface> mode ad-hoc
iwconfig <iface> channel 10

ifconfig <iface> 192.168.xxx.xxx

iwlist <iface> scan
iwlist <iface> channel

From the README.Debian script that comes with wireless-tools: /etc/network/interfaces

You can now add extra statements to the iface sections of the files in
/etc/network/interfaces that are specific for wireless interfaces. They
are of the form:

wireless-<function> <value>

Before the interface is brought up, such a statement will result in the
execution of the following command:

iwconfig <interface> <function> <value>

Example:

<licode>
iface eth0 inet static
address 192.168.1.2
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
wireless-essid livois
wireless-mode ad-hoc | managed
</licode>

The current Debian script support all arguments present in
wireless.opts apart from Nickname. You can check this in the script
/etc/network/if-pre-up.d/wireless-tool.
You will need of course to install the Wireless Tools package
if it's not already done, which is part of the standard package list
(use dselect, dpkg, apt or anything you like to get it).

=Installation des cartes=

==Installation de ndiswrapper (utilisé par plusieurs cartes)==

http://ndiswrapper.sourceforge.net/

#apt-get install ndiswrapper-modules-2.6.8-2-686 ndiswrapper-utils

#apt-get install ndiswrapper-source ndiswrapper-utils linux-headers

ETCH ndiswrapper-utils-1.8 remplace ndiswrapper-utils

#cd /usr/src/
#sudo tar jxvf ndiswrapper-source.tar.bz2
#cd modules/ndiswrapper/
#sudo make
#sudo make install

OU
telecharger http://ndiswrapper.sourceforge.net/
#cd ndiswrapper-<version>
#make deb
#cd ..
#sudo apt-get install ndiswrapper*.deb

#ln -s /usr/src/kernel-headers-2.6.8-2-686 /lib/modules/2.6.8-2-686/build

récupérer le driver sur http://ndiswrapper.sourceforge.net/mediawiki/index.php/Main_Page

===Ralink RT2500===
http://rt2x00.serialmonkey.com/wiki/index.php/Main_Page

#lspci

0000:00:09.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)

récupérer le module rt2500.ko (avec rt2500-1.1.0-b1 puis make)
/lib/modules/2.6.8-2-k7/kernel/drivers/net/wireless/rt2500.ko

===Connextant Prism ISL386 [Prism Javelin/Prism Xbow]===
#lspci
0000:01:01.0 Network controller: Intersil Corporation ISL3886 [Prism Javelin/Prism Xbow] (rev 01)

il faut passer par ndiswrapper car le module prism54 ne le gère pas
http://prism54.org
"Support for Xbow/Javelin will not be supported anytime soon."

<blockquote>
Remarque au 9 juin 2007: cela semble avoir changé - le matériel ISL38xx semble désormais supporté.
</blockquote>

-----------------------------------
Card: Gemtek WL850FJx (Conexant)
Chipset: Intersil Corporation ISL3886 Prism Javelin/Prism Xbow? (rev 01)
pciid: 1260:3886 (rev 01)
Driver: from "http://download.fujitsu-siemens.com/Download/ShowDescription.asp?SoftwareGUID=3B928095-EEEE-4194-91A7-E0CBE2D28B56"
Other: It came with Fujitsu-Siemens Amilo D1845 laptop. Working under debian, kernel 2.6.10
-----------------------------------
#mkdir FSC
#mv FSC_1001278.zip FSC
#unzip FSC_1001278.zip
#cd FSC
#sudo ndiswrapper -i PRISMA00.inf
#sudo ndiswrapper -l
#sudo ndiswrapper -m => écrit "alias wlan0 ndiswrapper" dans modprobe.d/ndiswrapper
#sudo depmod

#sudo modprobe ndiswrapper
#sudo insmod /lib/modules/2.6.xx/misc/ndiswrapper.ko

If the driver is loaded successfully, you should see a message in the system log ndiswrapper version V loaded
If you have successfully installed windows drivers earlier (with ndiswrapper -i INFfile), the ndiswrapper module will load them all. You should then see the following messages in system log ndiswrapper: driver driver1 added for each of the drivers. If you don't see these messages, it usually means that there are no (usable) drivers installed in /etc/ndiswrapper directory. If the system has a card that works with one of the loaded drivers, you should see the following message in the system log wlan0: ndiswrapper ethernet device xx:xx:xx:xx:xx:xx

#blacklist prism54
#sudo vi /etc/modprobe.d/blacklist

===Trendnet PC card TEW-421PC===
#lspci -v

0000:02:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
Subsystem: Texas Instruments: Unknown device 9067
Flags: medium devsel, IRQ 5
Memory at 1e820000 (32-bit, non-prefetchable) [disabled] [size=8K]
Memory at 1e800000 (32-bit, non-prefetchable) [disabled] [size=128K]
Capabilities: [40] Power Management version 2

#lspci -n

0000:02:00.0 0280: 104c:9066

Fonctionne avec ndiswrapper http://ndiswrapper.sourceforge.net/mediawiki/index.php
-----------------------------------------------
Card: Trendnet TEW-421PC Wireless CardBus Card

* Chipset: Texas Instruments ACX 111 54Mbps
* pciid: 104c:9066
* Driver: The WinXP driver coming with the card has troubles with associating to the access point; one day it associates immediately and everything works fine, the other day it just won't associate. This seems to be a configuration problem, as exactly the same driver (tnet1130.sys with firmware files fwrad16.bin and fwrad17.bin) with a different configuration (contained in tnet1130.inf) as distributed for the Airlink+ 802.11g Model AWLH3025 (http://www.airlinkplus.com/driver/11g/awlh3025_v6_0_5_30_xp.zip) works very well including WEP.
-------------------------------------------------
#sudo ndiswrapper -i TNET1130.INF
#sudo ndiswrapper -l

=le WPA=
http://hostap.epitest.fi/wpa_supplicant/

http://wiki.debian.org/WPA

#sudo apt-get install wpagui wpasupplicant

<licode file=/etc/network/interfaces>
auto wlan0
iface wlan0 inet static
address 192.168.10.33
network 192.168.10.0
netmask 255.255.255.0
broadcast 192.168.10.255
gateway 192.168.10.1
wpa-ssid livois.com
wpa-key-mgmt WPA-PSK
#wpa-psk: your preshared wpa key. Use wpa_passphrase(8) to generate your psk!
wpa-psk 927ff98714d0a8d74e131d942e1dfa49d268293953c68a6b85ece7eed8beb9b0
wpa-proto WPA
</licode>

{{copy|2007|Christophe de Livois|FDL}}

Wifi - Historique des versions

Christophe le 2 juin 2018 à 15:58

Christophe : /* le WPA */

Christophe le 2 juin 2018 à 15:39

Christophe : 1 version

Christophe : /* Connextant Prism ISL386 [Prism Javelin/Prism Xbow] */

Christophe : /* le WPA */

Christophe : 1 version

Christophe : /* Connextant Prism ISL386 [Prism Javelin/Prism Xbow] */