« Wifi » : différence entre les versions

De wikilivois
Aller à la navigationAller à la recherche
m (1 version)
Aucun résumé des modifications
 
(2 versions intermédiaires par le même utilisateur non affichées)
Ligne 1 : Ligne 1 :
[[Category:Systèmes]]
[[Category:Systèmes]]


http://ndiswrapper.sourceforge.net/
https://forum.ubuntu-fr.org/viewtopic.php?id=2011439


http://acx100.sourceforge.net/matrix.html
chris@ordi:~$ dmesg | grep rtl
[    6.312684] rtl8192ee: Using firmware rtlwifi/rtl8192eefw.bin
[    6.318298] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    6.318468] rtlwifi: rtlwifi: wireless switch is on
[    6.352737] rtl8192ee 0000:23:00.0 wlp35s0: renamed from wlan0


http://www.linux-wlan.org/ (liste de matériel compatible)


http://www.linuxhomenetworking.com/linux-hn/wmp11-linux.htm
chris@ordi:~$ nmcli dev wifi
*  SSID            MODE  CHAN  DÉBIT    SIGNAL  BARS  SÉCURITÉ   
  FreeWifi_secure  Infra  11    54 Mo/s  100    ▂▄▆█  WPA1 802.1X
  freeboxsasa      Infra  11    54 Mo/s  100    ▂▄▆█  WPA1       
  FreeWifi        Infra  11    54 Mo/s  100    ▂▄▆█  --         
  SFR-d158_2GEXT  Infra  11    54 Mo/s  100    ▂▄▆█  WPA1 WPA2 
  SFR-d158        Infra  11    54 Mo/s  67      ▂▄▆_  WPA2


http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.usage.html


http://hostap.epitest.fi/wpa_supplicant/
sudo -i
echo "options rtl8192ee swenc=1"  >  /etc/modprobe.d/rtl8192ee.conf
exit
 
https://askubuntu.com/questions/526214/how-to-set-parameters-for-realtek-wifi-rtl8723
 
sudo systool -a -v -m rtl8723be | grep -A8 "Parameters:"
 
sudo nano /etc/modprobe.d/rtl8723be.conf
 
options rtl8723be debug=1
options rtl8723be disable_watchdog=N
options rtl8723be fwlps=Y
options rtl8723be ips=Y
options rtl8723be msi=N
options rtl8723be swenc=N
options rtl8723be swlps=N
 
https://askubuntu.com/questions/1028547/rtl8192ee-wifi-not-working
 
 
https://forum.siduction.org/index.php?topic=5555.0
 
# inxi -v5
# systemctl --failed --no-pager
# ifconfig
 
<hr>


  iwconfig <iface> essid livois
  iwconfig <iface> essid livois
Ligne 54 : Ligne 89 :
(use dselect, dpkg, apt or anything you like to get it).
(use dselect, dpkg, apt or anything you like to get it).


=Installation des cartes=
==Installation de ndiswrapper (utilisé par plusieurs cartes)==
http://ndiswrapper.sourceforge.net/
#apt-get install ndiswrapper-modules-2.6.8-2-686 ndiswrapper-utils
#apt-get install ndiswrapper-source ndiswrapper-utils linux-headers
ETCH ndiswrapper-utils-1.8 remplace ndiswrapper-utils
#cd /usr/src/
#sudo tar jxvf ndiswrapper-source.tar.bz2
#cd modules/ndiswrapper/
#sudo make
#sudo make install
OU
telecharger http://ndiswrapper.sourceforge.net/
#cd ndiswrapper-<version>
#make deb
#cd ..
#sudo apt-get install ndiswrapper*.deb
#ln -s /usr/src/kernel-headers-2.6.8-2-686 /lib/modules/2.6.8-2-686/build
récupérer le driver sur http://ndiswrapper.sourceforge.net/mediawiki/index.php/Main_Page
===Ralink RT2500===
http://rt2x00.serialmonkey.com/wiki/index.php/Main_Page
#lspci
0000:00:09.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)
récupérer le module rt2500.ko (avec rt2500-1.1.0-b1 puis make)
/lib/modules/2.6.8-2-k7/kernel/drivers/net/wireless/rt2500.ko
===Connextant Prism ISL386 [Prism Javelin/Prism Xbow]===
#lspci
0000:01:01.0 Network controller: Intersil Corporation ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
il faut passer par ndiswrapper car le module prism54 ne le gère pas
http://prism54.org
"Support for Xbow/Javelin will not be supported anytime soon."
<blockquote>
Remarque au 9 juin 2007: cela semble avoir changé - le matériel ISL38xx semble désormais supporté.
</blockquote>
-----------------------------------
Card: Gemtek WL850FJx (Conexant)
Chipset: Intersil Corporation ISL3886 Prism Javelin/Prism Xbow? (rev 01)
pciid: 1260:3886 (rev 01)
Driver: from "http://download.fujitsu-siemens.com/Download/ShowDescription.asp?SoftwareGUID=3B928095-EEEE-4194-91A7-E0CBE2D28B56"
Other: It came with Fujitsu-Siemens Amilo D1845 laptop. Working under debian, kernel 2.6.10
-----------------------------------
#mkdir FSC
#mv FSC_1001278.zip FSC
#unzip FSC_1001278.zip
#cd FSC
#sudo ndiswrapper -i PRISMA00.inf
#sudo ndiswrapper -l
#sudo ndiswrapper -m => écrit "alias wlan0 ndiswrapper" dans modprobe.d/ndiswrapper
#sudo depmod
#sudo modprobe ndiswrapper
#sudo insmod /lib/modules/2.6.xx/misc/ndiswrapper.ko
If the driver is loaded successfully, you should see a message in the system log ndiswrapper version V loaded
If you have successfully installed windows drivers earlier (with ndiswrapper -i INFfile), the ndiswrapper module will load them all. You should then see the following messages in system log ndiswrapper: driver driver1 added for each of the drivers. If you don't see these messages, it usually means that there are no (usable) drivers installed in /etc/ndiswrapper directory. If the system has a card that works with one of the loaded drivers, you should see the following message in the system log wlan0: ndiswrapper ethernet device xx:xx:xx:xx:xx:xx
#blacklist prism54
#sudo vi /etc/modprobe.d/blacklist


===Trendnet PC card TEW-421PC===
#lspci -v


0000:02:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
        Subsystem: Texas Instruments: Unknown device 9067
        Flags: medium devsel, IRQ 5
        Memory at 1e820000 (32-bit, non-prefetchable) [disabled] [size=8K]
        Memory at 1e800000 (32-bit, non-prefetchable) [disabled] [size=128K]
        Capabilities: [40] Power Management version 2


#lspci -n
0000:02:00.0 0280: 104c:9066
Fonctionne avec ndiswrapper http://ndiswrapper.sourceforge.net/mediawiki/index.php
-----------------------------------------------
Card: Trendnet TEW-421PC Wireless CardBus Card
    * Chipset: Texas Instruments ACX 111 54Mbps
    * pciid: 104c:9066
    * Driver: The WinXP driver coming with the card has troubles with associating to the access point; one day it associates immediately and everything works fine, the other day it just won't associate. This seems to be a configuration problem, as exactly the same driver (tnet1130.sys with firmware files fwrad16.bin and fwrad17.bin) with a different configuration (contained in tnet1130.inf) as distributed for the Airlink+ 802.11g Model AWLH3025 (http://www.airlinkplus.com/driver/11g/awlh3025_v6_0_5_30_xp.zip) works very well including WEP.
-------------------------------------------------
#sudo ndiswrapper -i TNET1130.INF
#sudo ndiswrapper -l
=le WPA=
http://hostap.epitest.fi/wpa_supplicant/
http://wiki.debian.org/WPA
#sudo apt-get install wpagui wpasupplicant
<licode file=/etc/network/interfaces>
auto wlan0
iface wlan0 inet static
    address            192.168.10.33
    network            192.168.10.0
    netmask            255.255.255.0
    broadcast          192.168.10.255
    gateway 192.168.10.1
    wpa-ssid            livois.com
    wpa-key-mgmt        WPA-PSK
    #wpa-psk: your preshared wpa key. Use wpa_passphrase(8) to generate your psk!
    wpa-psk            927ff98714d0a8d74e131d942e1dfa49d268293953c68a6b85ece7eed8beb9b0
    wpa-proto          WPA
</licode>


{{copy|2007|Christophe de Livois|FDL}}
{{copy|2007-2018|Christophe de Livois|FDL}}

Version actuelle datée du 2 juin 2018 à 15:58


https://forum.ubuntu-fr.org/viewtopic.php?id=2011439

chris@ordi:~$ dmesg | grep rtl [ 6.312684] rtl8192ee: Using firmware rtlwifi/rtl8192eefw.bin [ 6.318298] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 6.318468] rtlwifi: rtlwifi: wireless switch is on [ 6.352737] rtl8192ee 0000:23:00.0 wlp35s0: renamed from wlan0


chris@ordi:~$ nmcli dev wifi

  • SSID MODE CHAN DÉBIT SIGNAL BARS SÉCURITÉ
  FreeWifi_secure  Infra  11    54 Mo/s  100     ▂▄▆█  WPA1 802.1X 
  freeboxsasa      Infra  11    54 Mo/s  100     ▂▄▆█  WPA1        
  FreeWifi         Infra  11    54 Mo/s  100     ▂▄▆█  --          
  SFR-d158_2GEXT   Infra  11    54 Mo/s  100     ▂▄▆█  WPA1 WPA2   
  SFR-d158         Infra  11    54 Mo/s  67      ▂▄▆_  WPA2 


sudo -i echo "options rtl8192ee swenc=1" > /etc/modprobe.d/rtl8192ee.conf exit

https://askubuntu.com/questions/526214/how-to-set-parameters-for-realtek-wifi-rtl8723

sudo systool -a -v -m rtl8723be | grep -A8 "Parameters:"

sudo nano /etc/modprobe.d/rtl8723be.conf

options rtl8723be debug=1 options rtl8723be disable_watchdog=N options rtl8723be fwlps=Y options rtl8723be ips=Y options rtl8723be msi=N options rtl8723be swenc=N options rtl8723be swlps=N

https://askubuntu.com/questions/1028547/rtl8192ee-wifi-not-working


https://forum.siduction.org/index.php?topic=5555.0

  1. inxi -v5
  2. systemctl --failed --no-pager
  3. ifconfig

iwconfig <iface> essid livois
iwconfig <iface> mode ad-hoc
iwconfig <iface> channel 10 
ifconfig <iface> 192.168.xxx.xxx
iwlist <iface> scan
iwlist <iface> channel

From the README.Debian script that comes with wireless-tools: /etc/network/interfaces

You can now add extra statements to the iface sections of the files in /etc/network/interfaces that are specific for wireless interfaces. They are of the form:

   wireless-<function> <value>

Before the interface is brought up, such a statement will result in the execution of the following command:

   iwconfig <interface> <function> <value>

Example:

<licode> iface eth0 inet static

   address 192.168.1.2
   network 192.168.1.0
   netmask 255.255.255.0
   broadcast 192.168.1.255
   wireless-essid livois
   wireless-mode ad-hoc | managed

</licode>

The current Debian script support all arguments present in wireless.opts apart from Nickname. You can check this in the script /etc/network/if-pre-up.d/wireless-tool. You will need of course to install the Wireless Tools package if it's not already done, which is part of the standard package list (use dselect, dpkg, apt or anything you like to get it).



Copyright

© 2007-2018 Christophe de Livois

Tête de GNU Vous avez l'autorisation de copier, distribuer et/ou modifier ce document suivant les termes de la GNU Free Documentation License, Version 1.2 ou n'importe quelle version ultérieure publiée par la Free Software Foundation; sans section invariante, sans page de garde, sans entête et sans page finale. Pour plus d'informations consulter le site de l'APRIL.