De wikilivois
Sauter à la navigation Sauter à la recherche


chris@ordi:~$ dmesg | grep rtl [ 6.312684] rtl8192ee: Using firmware rtlwifi/rtl8192eefw.bin [ 6.318298] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 6.318468] rtlwifi: rtlwifi: wireless switch is on [ 6.352737] rtl8192ee 0000:23:00.0 wlp35s0: renamed from wlan0

chris@ordi:~$ nmcli dev wifi

  FreeWifi_secure  Infra  11    54 Mo/s  100     ▂▄▆█  WPA1 802.1X 
  freeboxsasa      Infra  11    54 Mo/s  100     ▂▄▆█  WPA1        
  FreeWifi         Infra  11    54 Mo/s  100     ▂▄▆█  --          
  SFR-d158_2GEXT   Infra  11    54 Mo/s  100     ▂▄▆█  WPA1 WPA2   
  SFR-d158         Infra  11    54 Mo/s  67      ▂▄▆_  WPA2 

sudo -i echo "options rtl8192ee swenc=1" > /etc/modprobe.d/rtl8192ee.conf exit


sudo systool -a -v -m rtl8723be | grep -A8 "Parameters:"

sudo nano /etc/modprobe.d/rtl8723be.conf

options rtl8723be debug=1 options rtl8723be disable_watchdog=N options rtl8723be fwlps=Y options rtl8723be ips=Y options rtl8723be msi=N options rtl8723be swenc=N options rtl8723be swlps=N



  1. inxi -v5
  2. systemctl --failed --no-pager
  3. ifconfig

iwconfig <iface> essid livois
iwconfig <iface> mode ad-hoc
iwconfig <iface> channel 10 
ifconfig <iface> 192.168.xxx.xxx
iwlist <iface> scan
iwlist <iface> channel

From the README.Debian script that comes with wireless-tools: /etc/network/interfaces

You can now add extra statements to the iface sections of the files in /etc/network/interfaces that are specific for wireless interfaces. They are of the form:

   wireless-<function> <value>

Before the interface is brought up, such a statement will result in the execution of the following command:

   iwconfig <interface> <function> <value>


iface eth0 inet static
    wireless-essid livois
    wireless-mode ad-hoc | managed

The current Debian script support all arguments present in wireless.opts apart from Nickname. You can check this in the script /etc/network/if-pre-up.d/wireless-tool. You will need of course to install the Wireless Tools package if it's not already done, which is part of the standard package list (use dselect, dpkg, apt or anything you like to get it).


© 2007-2018 Christophe de Livois

Tête de GNU Vous avez l'autorisation de copier, distribuer et/ou modifier ce document suivant les termes de la GNU Free Documentation License, Version 1.2 ou n'importe quelle version ultérieure publiée par la Free Software Foundation; sans section invariante, sans page de garde, sans entête et sans page finale. Pour plus d'informations consulter le site de l'APRIL.