« John the Ripper » : différence entre les versions

De wikilivois
Aller à la navigationAller à la recherche
Aucun résumé des modifications
Aucun résumé des modifications
Ligne 26 : Ligne 26 :
Here is what each section means:
Here is what each section means:


    Type of encryption it is trying to crack with
#Type of encryption it is trying to crack with
    Number of successful password guesses
#Number of successful password guesses
    Time elapsed since started
#Time elapsed since started
    Percent completed for that pass
#Percent completed for that pass
    Current pass / number of passes total
#Current pass / number of passes total
    g/s = successful guesses per second
#g/s = successful guesses per second
    p/s = passwords tested per second
#p/s = passwords tested per second
    c/s = crypts (password hashes) computed per second
#c/s = crypts (password hashes) computed per second
    C/s = crypts tested per second (in versions below 1.8.0 this was “c/s”)
#C/s = crypts tested per second (in versions below 1.8.0 this was “c/s”)
    The current word it’s trying.
#The current word it’s trying.

Version du 2 février 2019 à 10:31

https://www.openwall.com/john/doc/

Installer John

$sudo apt-get install john

Préparer le fichier

$sudo unshadow /etc/passwd /etc/shadow > mypasswd

Lancer la recherche de mots de passe

$sudo john mypasswd

Afficher les résultats

$sudo john –show mypasswd


$sudo john --status

While John the Ripper is running, press any key (like enter) to see a status output. Or to check from another terminal you can run john --status. The output looks like this:

DES cracking speed: 94g 0:01:08:34 74% 2/3 0.02284g/s 2784p/s 97648c/s 269491C/s day?..Hal?
1                   2   3          4   5   6          7       8        9         10

Here is what each section means:

  1. Type of encryption it is trying to crack with
  2. Number of successful password guesses
  3. Time elapsed since started
  4. Percent completed for that pass
  5. Current pass / number of passes total
  6. g/s = successful guesses per second
  7. p/s = passwords tested per second
  8. c/s = crypts (password hashes) computed per second
  9. C/s = crypts tested per second (in versions below 1.8.0 this was “c/s”)
  10. The current word it’s trying.